Inline Chlorine/Bromine Feeder #320 Review

THIS IS A VERY GOOD INLINE FEEDER IT WORKS VERY WELL WITH 1" TABS. I RECOMMEND MOVING THE FEEDER VALVE AND TUBING TO THE TOP OF THE UNIT FROM THE BOTTOM THIS WILL NOT ONLY FEED MORE CLORINE BUT ALSO HELPS CONTROL AIR BUBBLES ***EXTRA NOTE THE FEEDER VALVE IS CHEAP PLASTIC TAKE CAUTION WHEN TIGHTENING FITTINGS. A VERY LITTLE PAST HAND TIGHT IS ALL***. I FOUND THE BEST PROCESS FOR FILLING THE UNIT IS. 1)TURN OFF MAIN PUMP AND FEEDER VALVE 2)REMOVE TOP AND ADD CLORINE TABS 3)CLEAN O-RING INSIDE TOP AND REINSTALL TOP JUST A FEW TURNS NOT TIGHT 4)TURN ON MAIN PUMP AND KEEP HAND ON CLORINE FEEDER TOP 5)WHEN WATER STARTS TO RUN OUT FROM UNDER THE TOP FINISH TIGHTENING (THIS WILL GET ALL AIR OUT OF THE SYSTEM SO TABS WILL DESOLVE CORRECTLY)

Click Here to see more reviews about: Inline Chlorine/Bromine Feeder #320

Product Description:
For permanent installation in return line of new or existing pools or spas. Installs in return line on pressure side of pump downstream of all equipment. Standard with 2 in. slip PVC fittings and adapters for 1 1/2 in. Holds 11 large or 98 small Bromine or Trichlor slow dissolving tablets. Treats 6,500 to 27,000 gallons bottom feed and 18,000 to 70,000 gallons top feed.

Buy cheap Inline Chlorine/Bromine Feeder #320 now